7
2
53 32 33
37
42
27
50
31
15
16
11
10
7
8
17
5
6
13
78
14
9
23
42
47
63
62
95
39
30
29
20
28
22
21
54
53
51
50
19
36
38
24
52
49
25
26
18
106
105
X5a-X9a
12
connection
Speaker
X5a
X6a
X7a
X8a
X9a
see picture 8
•
Assembly of the tripod (27, picture 2)
Remove the tripod (27) out of the cardboard and disassemble the back covering hood (55, picture 4). Arran-
ge the tripod in the middle behind the footrack. Thereby introduce the pins of the M8 screws, which are
welded in and standing out of the foot casing (4 pieces) and the light casing (2 pieces), into the corresponding
drill-holes of the tripod. Secure the screws (28) of the foot-casing with toothed disks A8, 4 (29) and octagonal
nuts M8 (30), secure the screws (31) of the light-casing with washers (32) having 25 mm in external diameter
and with hexagonal nuts M8 (33).
Thereafter also put the 18-poled cable with plug X3 (36) that comes out of the unit’s terminal (37) in the tripod,
together with the corresponding socket connector X3 (38) of the assembly plate control unit. Further on, carry
the long cable (39) of the assembly plate control unit to the right through the square opening and carry it
outside through the pusher airscrew (95) with tractive relief. Leave behind enough cable in the back part of
the footrack, so that the assembly plate control unit can still be pulled out. Fix the covering hood
(40, picture 3) on to.
