www.fastinc.com 1-800-243-9271
229-51300 E © 2005-2010 FAST
(FASTRON.) VC-220
System Programming
9
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Auto Pre-Heat
Global Timer
To confirm
your choice,
press ENTER.
Press PROG
twice to exit.
Set a new time using the num-
bered keys (see example).
Exit System
Programming Mode
Enter System
Programming Mode
CODE 1712
Press and
hold for 3
seconds.
Enter code
1 7 1 2
The Auto Pre-heat Global Timer
can be enabled or disabled. When it is enabled, an
internal clock keeps track of how long the grill control has been idle. If the auto pre-
heat option is enabled for a given recipe, and the recipe is selected in idle mode by
pressing the appropriate product key after power up, the controller software will al-
ways perform a pre-heat cycle in cook/timer mode for the time specified by the first
stage of the recipe. Once the recipe is completed and the controller software returns
to the idle mode, a programmable auto pre-heat global timer will be counting down. If
a recipe button is pushed during this time the pre-heat cycle (stage 1 timer) will be
skipped and the recipe will continue with stage 2 instead. However, if no recipe is
started within 20 minutes, the “Auto pre-heat” function will become active. Once the
“Auto Pre-heat” function becomes active, any recipe that is started with its auto pre-
heat option enabled will perform a pre-heat cycle for a time specified by its stage 1
time.
The following are all conditions that will activate or reset the “Auto Pre-heat” global
timer:
Auto Pre-heat global timer will start counting down after a recipe is completed or can-
celed during a “Hold Mode” stage (Hold Mode flag = enabled). The timer will not start
counting down if the recipe is canceled during a cook stage (Hold Mode flag =
disabled).
Auto Pre-heat global timer will be reset after all consecutive cook stages are com-
pleted. If there is only one cook stage for a given recipe, then the Auto Pre-heat global
timer will be reset after the one cook stage is done.
NOTE: You can only exit system
programming when a key or
keys have been completely
programmed and the display
shows SYSTEM PROGRAM.
