www.fastinc.com 1-800-243-9271
229-51300 E © 2005-2010 FAST
(FASTRON.) VC-220
Feature Definitions
4
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Stage Timing
Each product key has up to eleven (11) timing stages.
Each stage has:
1.
Product name
2.
Auto preheat flag
3.
Stage or preheat time
4.
Stage name
5.
Heat ON time
6.
Lamp color
7.
Lamp state
8.
Stage done
9.
Hold mode flag
10. Cancel mode
11. Beep frequency
Cancel Mode
The VC-220 offers a choice of Manual or Automatic
canceling of each product stage.
English/Spanish Mode
The user can switch from English to Spanish languages
by pressing this key on the front panel either before or
during a timing cycle.
Alarm Frequency — 6 Different
The VC-220 can be programmed for one of six (6)
different alarm frequencies. Choices are NONE, 1, 2, 3,
4, 5 or 6 beeps per second.
Hold Mode
Each recipe stage has an associated hold mode flag.
The hold mode flag is used by the auto-preheat
function, and the auto cancel and restart function. If an
active recipe stage has its hold mode flag set to
enabled, then the stage is referred to as a “Hold
mode” stage and is used to warm and/or hold the
product for a programmable amount of time. If the flag
is set to disabled, then the stage is a cook stage and is
used to cook the product or dissipate excess steam. A
“Hold Mode” stage uses the same programmable
parameters as a cook stage. However, one unique
functional difference of an active “Hold Mode” stage is
that the recipe may be restarted while performing this
type of stage.
Intuitive User Interface
a.
Bright blue 16x2 (16 characters x 2 lines) VFD
(vacuum flourescent display).
b.
Red LED lights for each product key.
Cook Status Lamp Lights
a.
SOLID RED: Idle Mode
b.
FLASHING RED: Discard Mode (until someone
presses the product button to
return to idle mode).
c.
SOLID YELLOW: Last Hold Mode
d.
SOLID GREEN: Ready to Serve, Initial Hold Modes
e.
FLASHING GREEN: Pre-Heat/Cooking Modes
NOTE: These are default settings that can be
configured in each stage.
Power Loss Protection
In the event of a momentary power loss, the controller
will resume its current operation from the point power
was interrupted. Programmed recipes are always
saved.
Free Technical Support
24x7x365 toll-free, no charge, technical support for
programming assistance.
