www.fastinc.com 1-800-243-9271
229-51414C © 2008-2010 FAST
Vision Vertical Oven Controller
Programming the Controller
6
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Adding Product and Pre-alarm
Names—3228
Programming a Custom Product and
Pre-alarm Name
Press and hold the “P” for 3 seconds.
Product Cnt
will be displayed. Press the down
arrow.
Programming
will be displayed, then press the “P”
key.
ENTER CODE
will be displayed.
From
ENTER CODE
type in 3228 then press the “P”
key.
Display will show
System.
Press the down arrow
key until either
ProdName Lib
or
Alarm Lib
is
displayed.
Press the “P” key and a flashing dash will be
displayed.
Press the SCAN key and use the number keys to
spell the new word using the right arrow key to
go to the position of the word. Once the word is
spelled press the “P” key and
Save Library ADD
will be displayed.
If you press the “P” key again the word you
spelled will be saved. If you don’t want the word
or need to modify it, press the left or right arrow
key to CANCEL or MODIFY and press the “P”.
NOTE: To delete the word and start over press
the TOGGLE/CLEAR key.
To Exit Library Mode
Either
ProdName Lib
or the
Alarm Lib
will be
displayed. Press the arrow up or down key until
the display reads Exit. Press the “P” key.
