Programming the Controller
3
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Vision Vertical Oven Controller
www.fastinc.com 1-800-243-9271
229-51414C © 2008-2010 FAST
Recipe Programming—1724
Entering Programming and Changing
Recipes
Press and hold the “P” for 3 seconds.
Product Cnt
will be displayed. Press the down
arrow.
Programming
will be displayed, then press the “P”
key.
ENTER CODE
will be displayed.
From
ENTER CODE
, type in 1724, then press the “P”
key.
Display will show
RECIPE
. Press the “P” key and all
product LEDs will light up and the display will
read
Select Product To Program
.
Press the Product key you would like to program.
NOTE: Some controls have different options
than what are listed.
ALL
will be displayed.
NOTE: Depending on the model of the unit,
you can either press the “P” key to change
all of the programmable settings or you can
scroll using the arrow Up or Down keys to any of
the specific options.
From
ALL
being displayed press the “P” key.
Product Name
will be displayed. To scroll through
the Library, use the arrow Up or Down keys or
you can use the letters on each key to start a
word from the Library. Once you have chosen
your word, press the “P” key.
Stage X Time
will be displayed with the current set
time
XX:XX
. To change, type in a new time, then
press the “P” key.
Stage X Temp
will be displayed with the current set
temp
XXXF
. To change temperature, type in your
new temperature. Then press the “P” key.
Stage X Timing
will be displayed, then either
STRAIGHT
,
FLEX
or
SENSITIVITY
. Use the left or right
arrow keys to change between the 3 settings.
Then press the “P” key.
If SENSITIVITY is selected:
Stage X Sens
will be displayed with the current
sensitivity setting
0-9
. To change the sensitivity
setting, type in your new setting. Then press the
“P” key.
Stage X Fan Spd
will be displayed, then either
HIGH
or
LOW
. Use the left or right arrow keys to change
between the 2 settings. Then press the “P” key.
Stage X Fan Cyc
will be displayed, then either
FULL
,
HEAT
, or
PULSE
. Use the left or right arrow keys to
change between the 3 settings. Then press the
“P” key.
If PULSE is selected:
Stage X Fan ON
will be displayed with the current
time
XX:XX
. To change the Fan ON time, type in a
new time. Then press the “P” key.
Stage X Fan OFF
will be displayed with the current
time
XX:XX
. To change the Fan OFF time, type in a
new time. Then press the “P” key.
stage x steam
will be displayed followed by either
ON
or
OFF
. Use the left or right arrow keys to
change between the two settings. Press the “P”
key.
NOTE: Each product key can be
programmed with up to 10 stages. If no
additional stages are required, set the time to
zero, and press the “P” key to continue to Alarm
Time.
Alarm X Time
will be displayed with the current
time
XX:XX
. To change the alarm time, type in a
new time. Then press the “P” key.
Alarm X Name
will be displayed with the current
name. To scroll through the Library, use the arrow
Up or Down keys or you can use the letters on
each key to start a word from the Library. Once
you have chosen your word, press the “P” key.
