The unauthorized use or duplica-
tion of the software described
herein, or this material, is strictly
prohibited.
229-51339 Rev A
© 2007 FAST
24/7 Tech Support:
1-800-243-9271
Operating Instructions
6
Holding Timers
If the controller is programmed with holding times,
they will automatically start counting upon expiration
of the cooking cycle.
When there are active hold times, the HOLD indicator
light will be lit.
To
View All Active Hold Times
, press and hold the
HOLD key. Upon expiration, the timer will display
HOLD
and pulse with an audible tone.
To Cancel, press the HOLD key.
Operating the
Controller
Start a Cook Cycle
Press any product key to start a cook cycle. If the key is
programmed, the correct cooking time will be displayed
and will immediately start to count down in minutes
and seconds.
DONE
will display when the cook cycle has
ended.
The pressure solenoid will also close if programmed to
do so, or a basket lift will lower if so equipped.
If
DONE
is displayed immediately and the unit starts to
signal, the product key being pressed is not pro-
grammed.
Stop a Cook Cycle
Press and hold an active product key for 3 seconds.
Timing will stop.
Respond to a DONE Alarm
Cancel the signal by pressing the same product key
used to start the cook cycle.
Action Alarms
If the controller is programmed for action alarms, they
will signal at a preset time during the cooking cycle. The
signal, a dual-rhythm beeping, will last 5 seconds and
then self-cancel. The display will flash the action alarm
time and the controller will start counting toward
0:00
.
