6
2.2 Basic Configuration of Fastrax II Dome Camera System
Figure 4- Basic installation diagram
The dome camera must be installed by qualified service personnel in accordance with all local and federal electrical and building codes.
The system should be installed according to Figures 4 through 9.
Power
4VAC
STP AWG #4
Sensor
Alarm input
up to 8
Siren
Light
Alarm output
up to 4
BNC
Alarm output
~
Alarm input
~ 4
Power
4VAC
Dome+
Dome–
Alarm output
3 ~ 4
Alarm input
5 ~ 8
Monitor
BNC
RS-485
Half Duplex mode: RX+, RX–
RS-4
Simplex mode: (RX+), (RX–)
Duplex mode: (TX+), (TX–), (RX+), (RX–)
J-Box (Back)
J-Box (Front)
unshielded cable
unshielded cable
DATA port should be connected
in case that DOME port or DVR
port are used.
Up to 8 Dome cameras including
3 alarm mode can be connected
at DOME port.
Rear
Keyboard controller
