2.4 Setting Address (ID) of Dome Camera
To prevent damage, each dome camera must have a unique address (ID). When installing multiple dome cameras using a multiplexer, it is suggested that the
dome camera address matches the multiplexer port number.
If you wan to set the address more than 999, you should connect the service provider.
Example:
Port = Dome , Port = Dome ... Port 6 = Dome 6. If more than 6 dome cameras are installed using two or more multiplexers, ID of the
dome camera should be ID of MUX x No. of camera IN. (e.g. multiplexer ID= n, Camera IN= m then ID of Dome =6x(n-)+m )
Refer to Figures 4-5 for setting the dome camera address (ID) and protocol selection.
Figure - Setting Address (ID) of Dome Camera
Beyond ID 999, contact your service provider.
Figure - Termination Diagram
Dome ID
S3
S2
S1
1
0
0
2
0
0
…
…
…
…
999
9
9
9
