FASTERHOLT FM4550, Руководство пользователя и каталог запасных частей

Страница: 21 / 96

21
There are different constants that can be set by the user.
These constant will be saved for years even ifthe battery is disconnected.
Programming procedure:
The speed should be adjusted to 11.1 m/h to reach the constants.
Press rapidly the PROG key 3 times to gain access to change the constants.
Then by pressing the PROG key, it steps forward to the constant, which should be altered.
With the “+” and “ -” keys the constant value can be changed. Press the MENU key to save, and the Program Rain
display goes back to normal. If the MENU key is not pressed, the Program Rain switches back to normal after I
minute, and the changes ofthe constants are not saved.
Constant nr. 11 (the code) is set to 111 to enter the machine data.
Then press PROG and the machine data is shown.
Cons
no.
Note Fact.
Adj.
Min.
Value
Max.
Value
Description
0 100 - - Enter 111 to reach machine data
1 00:00 00:00 23:59 Time in line 2 is set
2 8 1 15 Pre irrigation
3 8 1 15 Pre irrigation
4 20 0 99 Supervision time [minutes]
5 1 1 15 1 English, 2 Danish, 3 German, 4 French, 5, Dutch
6 Swedish, 7 Spanish, 8 Italian, 9 Polish, 10 Japanese
11 Hungarian
6 0 0 2 0 = Stop for high pressure slow shutdown
1 = Stop for low pressure. valve opens and close again after 3 minutes
2 = Motor for stop disconnected
7 - 0 1000 Actual distance, can be set by the keyboard [m]
8 0 0 1000 Early stop [m]
( * Is only performed when Post Irrigation is selected * )
9 0 0 1000 Post irrigation before stop [m]
10 0 0 1000 Distance for alarm [m]
( * Disabled if Machine data 22. Sprinkler, is selected * )
11 40 5 120 Water flow [m3/h]
12 60 5 100 Spacing between irrigation lanes [m]