FASTERHOLT FM4550, Руководство пользователя и каталог запасных частей

Страница: 19 / 96

19
PRE-IRRIGATION:
If pre-irrigation is required, press the PRE- key. The pre-irrigation time is calculated as 8 x the time to move 1 m at the current speed. The
constant can be changed individually for pre- and post-irrigation. (See constants). If pre-irrigation is selected, the machine will move forward
approx. ½ m, after which the machine will stop and stand still for as long as pre-irrigation is performed. Menu 2 shows the number of minutes
remaining of the pre-irrigation time. If you want to cancel pre-irrigation, press the START key. This will cancel both pre- and pre- and post-
irrigation and the turbine will start.
POST-IRRIGATION:
If post-irrigationis required, press the POST- key. The post-irrigation time is calculated as 8 x the time to move 1 m at the current speed. The
constant "8" can be changed individually for pre- and post-irrigation. (See constants on page 17). Post-irrigation starts counting down when the
magnet is removed from the stop sensor. When the stop sensor is activated, the turbine stops and post-irrigation starts counting down (see
menu 2). When the post-irrigation time has elapsed, the main valve closes. (Opens in installations with negative pressure stops). For machines
with mechanical end stops: The turbine stops when the stop sensor is activated. When the post-irrigation time has elapsed, the turbine starts
and the machine moves to the mechanical end stop. Press START to cancel post-irrigation. If constant "8" (early stop) is selected, the machine
will stop when it reaches the selected distance.
PROGRAMMING 4 DIFFERENT SPEEDS:
The hose must be unwound before programming, so the computer knows the number of metres in the irrigation lane. The following example
assumes that the unwound hose is 400 m. Press the PROG key 3 times and the display will show:
The desired speed can now be selected, in this case 25.0 m/h. Press the
PROG
key and the display will show:
The desired distance can now be selected, in this case 300 m. Press the
PROG
key and the display will show:
Now that the first zone is programmed, apply the same procedure to all 4 zones. Zone 4 automatically ends at 0. When zone 4 is programmed,
press the
PROG
key again and the display will show:
If
PROG
is pressed, the program is stored and irrigation will be performed according to this program.
If MENU is pressed, the program is deleted and the speed is the same for the entire irrigation lane.