FASTERHOLT FM4400, Руководство пользователя и запчасти

Страница: 25 / 92

25
MENU 5
SIGNAL GSM signal strength.
NETWORK GSM network.
A: First number on "SMS" list.
B: Second number on "SMS" list.
See GSM chapter for details.
START:
The turbine can only start if the magnet is aligned with the end stop sensor (or end stop sensors). See menu 3 for control of the
STOP SENSOR. Press the START key to turn on the water. The regulator valve for bypass around the turbine then closes. (Turbine
starts). If the end stop sensor is not in place, only the main valve can be opened, which then immediately closes again. Used to
relieve pressure before removing charge hose from hydrant.
DEFERRAL OF START TIME
First press the
STOP
key to shut off the water. Then press the
MENU
key 3 times and
PROG
3 times. The start time can be set using the "+"
and "-" keys. Finally, select pre- and post-irrigation. To exit, press
MENU.
Info: The clock can only be set forwards.
STOP:
When the magnet is removed from the end stop sensor, the turbine stops and the main valve shuts off the water (turns on the
water at negative pressure). If post-irrigation is selected, rewinding stops when the magnet is removed from the sensor. When the
post-irrigation time has elapsed, the main valve closes. When the STOP key is pressed, the turbine stops immediately and the main
valve shuts off the water, regardless of whether post-irrigation is selected.
SUPERVISION:
Program Rain has a built-in supervision system. The supervision system will be activated if for any reason the machine has water in
the same location for longer than a specified time. This time is factory-set to 20 minutes. If the time is set to 0, there is no supervi-
sion. (See constants on page 17 for setting the supervision time.) If speed supervision less than 50 % of pre-selection is required,
select speed supervision together with the above time.
SPEED:
The speed is set using the "+" and "-" keys. First count up in steps of 0.1 m/h. After 10 steps, count up in steps of 1 m/h. The speed
can be changed at any time during irrigation. If the speed changes during irrigation, the dose and time for the remaining irrigation
will be calculated immediately based on the new speed.