FASTERHOLT FM4400, Руководство пользователя и запчасти

Страница: 11 / 92

11
Nelson SR 150 is factory-adjusted to Danish conditions and ready to use after the following three steps:
1. Select and install the nozzle size that best suits your application. Performance data for the different sizes are shown in the table
below.
2. Adjust the stop on the part circle to obtain the desired irrigation angle.
3. There is a grease fitting which should be checked once a week for refilling.
ADJUSTMENT
The only thing you can adjust is the counterweight on the drive arm. By moving the
counterweight forward, the gun will slowly irrigate from side to side. If you move the
counterweight back, the gun will irrigate quickly. If it does not irrigate quickly enough, you
can remove the brake springs (no. 778474) in pairs (contact the service department).
WARNING: DO NOT ADJUST WHEN THE GUN IS IRRIGATING !!
DANGER........: HIGH WATER PRESSURE – STAY CLEAR !!
TABLE FOR NELSON SR 150