(619) 665-2077
Bridge Valve Operation
The following steps will determine if the
Bridge Valve
is operating correctly.
1.
Close the cold water angle stop (valve) below the sink where the
Bridge Valve
is located.
2.
Open the cold water faucet.
3.
Water should flow from the faucet until warm water (95°F) reaches the
Bridge Valve
.
The flow should gradually decrease until no water is coming from the faucet at which
time the
Bridge Valve
has closed.
Safety Warning
Warning
: Risk of electrical shock. This pump is supplied with a grounding
conductor. To reduce the risk of electrical shock, be certain that it is connected only to
a properly grounded grounding type receptacle. The safe operation of this pump
requires that I be grounded in accordance with the national Electrical Code and local
government regulations.
Operating Instructions
To activate the
Water
Quick Tankless – Red Pump
, simply turn on any hot water faucet in the
house and quickly turn it off.
This will start the pump and within a few seconds you will have hot water everywhere in your
home. The amount of time that you wait varies from home to home and is dependent on how far
the sink is from the water heater, the size of your water pipes and how many turns there are in the
water pipes.
