Media Convertor Between Point A and Point B
1.
Firstly Insert SFP module into the SFP slot, connect the fiber optic cable if it is ready in the field.
2.
Next, use cat5e/6 patch cord to connect RJ45 port to your IP devices.
3.
now, Insert positive /negative DC12V power wires into the contact terminal; the “PWR” LED will be steadily on.
4. Once media convertor detects fiber optical link, the FXLINK LED indicator will be steadily on the show the link is being
formed successfully.
Media Convertor and PoE Switch
1.
Firstly Follow the process above to setup the media convertor at front end.
2.
Next, insert SFP module into the SFP slot on the PoE switch, connect the fiber optical cable if it is ready.
3.
Once media convertor detects fiber optical link, the FXLINK LED indicator will be steadily on to show the link is being
formed successfully.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s
label. Connection to a different power source than those specified may result in improper operation, damage to the
equipment or pose a fire hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service
technician.
3. Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the
equipment.
4. Protective bonding must be installed in accordance with local national wiring rules and regulations.
Need More Help?
If you require more help setting up your industrial media converter, please head to our help site where you will be
able to find the corresponding help guides and video tourist.
Visit our help site
fastcabling.com/support/
