Fast FV3000-DOS, Инструкция по эксплуатации

Страница: 53 / 66

FV3000
- - 43
【 FV3000-DOS 】
Combination 1 2 3
Slot 1 PLUM-001 PLUM-001 PLUM-001
Slot 2 FG1 FG1 FG1
Slot 3 - FIO01 FIO01-1
Slot 4 FG2-1 FG2-1 FIO01-2
Slot 5 FG2-2 FG2-2 FIO01-3
*
“
FG1
”
and
“
FG2
”
mean that they are different types of frame grabbers.
“
FG1-1
”
and
“
FG1-2
”
mean that they are the
same type of frame grabbers.
e.g. When inserting one FVC02 board, two FHC3321(A) boards and one FIO01 board, place the FVC02 to the FG1 position,
the FHC3321(A)s to the FG2-1 and FG2-2 positions ,and the FI001 to the FIO01 position, referring to
“
Combination
2
”
.
There are some restrictions on the combinations of boards. Follow the instructions below.
* Only one RICE-001 board can be inserted at the same time.
* If the installed software supports several boards, you may install up to 2 RICE-001(a) boards.
Refer to the release note for update information about available libraries. Go to our website to download the
latest release notes. ( http://www.fast-corp.co.jp )
* Up to two FVC01 and FVC02 boards can be inserted.
* The following boards cannot be used at the same time; RICE-001(a)/FVC01/FVC02
* When using FHC330A/FHC3321(A)/FHC3310(A) boards, up to 2 boards each or up to 2 boards in combination can be
inserted.
* When using the FHC series with RICE-001/FVC01/FVC02 boards in combination, the FHC series should always be inserted
into Slot 3.
* Please refer to the manual for each board about their specifications.
Available to install
up to 3 boards
Number of identical
boards that can be
inserted
Available combinations
RICE-001(a) 1 ● − − −
FVC01 2 − ● − −
FVC02 2 − − ● −
FHC330A ● ● ● ●
FHC3321(A) ● ● ● ●
FHC3310(A)
2 in total
● ● ● ●
・RICE-001(a)
・FVC01
・FVC02
・FHC330A
・FHC3321(A)
・FHC3310(A)
Select when purchasing
・FIO01
Select when purchasing
背面から見た場合
RS232C CH1
Top of the Unit
Slot 5
Slot 2
Slot 4
Backside of the Unit
Vacant
Slot 3
Slot 1
・PLUM-001
Standard Placement
Of Boards
Placement List (up to 3 frame grabbers and 3 FIO01 boards)