![background image](http://html1.mh-extra.com/html/fast/bw500/bw500_operation-and-maintenance-manual_3548700050.webp)
EFT Boom Electrical Connections
Page 44
HYDRAULIC DRIVE PUMP (OPTIONAL)
for proper connection to the tractor. The
pair of hoses for the fold IN or OUT will
have one color and the boom UP or
DOWN will be another color.
3.There is an extra set of the colored tie
wraps shipped with your sprayer. Attach
these tie wraps to the proper tractor
hydraulic couplers to aid in the correct
reattaching of the sprayer hydraulic hoses.
Note:
If sprayer is being hitched to the
tractor for the first time, charge the sprayer
hydraulic system with oil.
IMPORTANT:
The storage slots for the
hydraulic hoses should ONLY be used
when sprayer is disconnected from the
tractor and being stored. Hydraulic hoses
MUST always be connected to tractor
during transport of sprayer.
EFT Boom Electrical Connections
There are three wires that are to be con-
nected to the tractor.
1.Connect the two RED wires to the posi-
tive (+) 12 volt power source of the tractor.
The RED wires can be connected directly
to the battery or to an auxiliary connection
such as the fuse block.
2.Connect the WHITE wire to the negative
(-) ground source of the tractor. The
WHITE wire can be connected directly to
the negative battery or to an auxiliary con-
nection as long as a good ground is main-
tained
HC Boom Hydraulic Hose and Electrical
Connections
Your sprayer has been shipped from the
factory set-up for use with a tractor that
has “Closed Center” Hydraulics. Deter-
mine if your tractor has this type of hydrau-
lics. Connect sprayer hydraulic hoses to
the tractor hydraulic system. When the HC
boom is in use, the hydraulic valve on the
tractor MUST be locked open to assure a
constant supply of oil to the cylinder valve
control bank located at the back of the
sprayer.
HC Boom Electrical Connections
There are two wires that are to be con-
nected to the tractor.
1.Connect the RED wire to the positive (+)
12 volt power source of the tractor. The
RED wire can be connected directly to the
battery or to an auxiliary connection such
as the fuse block.
2.Connect the WHITE wire to the negative
(-) ground source of the tractor. The
WHITE wire can be connected directly to
the negative battery or to an auxiliary con-
nection as long as a good ground is main-
tained.
If your tractor has “Closed Center”
Hydraulics, turn the flow rate on your trac-
tor hydraulic system down to 5 to 6 GPM
and try the sprayer boom functions. If the
sprayer functions are not satisfactory, the
valve block located at the rear of the boom
can be altered to operate with “Open Cen-
ter” Hydraulic systems.
To change from “Closed Center” Hydraulic
system set-up to “Open Center” Hydrau-
lics:
1.Locate the valve block at the rear of your
sprayer on the rear tower.
2.Locate the plug on the left hand end of
block, remove and insert cartridge p/n
630036 (FV273017) into block (torque to
25 ft/lb), install coil and torque to 5 ft/lb.
Connect loose lead to coil.
3.Your sprayer is now set-up to be used
with “Open Center” Hydraulics.
NOTE:
If sprayer is being hitched to the
tractor for the first time, charge the sprayer
hydraulic system with oil.
Содержание BW500
