background image

3

Limited Warranty

FAST Ag Solutions

 warrants to the buyer that the new machinery is free from defects in material and workmanship.

This warranty is only effective as to any new machinery which has not been altered, changed, repaired or treated since its 

delivery to the buyer, other than by 

FAST Ag Solutions

 or its authorized dealers or employees, and does not apply to 

accessories, attachments, tools or parts, sold or operated with the new machinery, if they have not been manufactured by 

Fast Ag Solutions

.

FAST Ag Solutions

 shall only be liable for defects in the materials or workmanship attributable to faulty material or bad 

workmanship that can be proved by the buyer, and specifically excludes liability for repairs arising as a result of normal 

wear  and  tear  of  the  new  machinery  or  in  any  other  manner  whatsoever,  and  without  limiting  the  generality  of  the 

foregoing, excludes  application  or  installation  of  parts  not  completed  in  accordance  with 

FAST Ag Solutions

  operator’s 

manual, specifications, or printed instructions.

Written notice shall be given by registered mail, to 

FAST Ag Solutions

 within seven (7) days after the defect shall have 

become apparent or the repairs shall have become necessary, addressed as follows: 

FAST GLOBAL SOLUTIONS

 

4130 Commerce Boulevard

Windom, MN 56101

This warranty shall expire one (1) year after the date of delivery of the new machinery.

If these conditions are fulfilled, FAST shall at its own cost and at its own option either repair or replace any defective parts 

provided that the buyer shall be responsible for all expenses incurred as a result of repairs, labor, parts, transportation or 

any other work, unless FAST has authorized such expenses in advance.

The warranty shall not extend to any repairs, changes, alterations, or replacements made to the new equipment other than 

by FAST or its authorized dealers or employees. 

This warranty extends only to the original owner of the new equipment.

Rubber parts (including tires, hoses, grommets) are not warranted. 

This warranty is limited to the terms stated herein and is in lieu of any other warranties whether express or implied, and 

without limiting the generality of the foregoing, excluded all warranties, express or implied or conditions whether statutory 

or otherwise as to quality and fitness for any purpose of the new equipment. FAST disclaims all liability for incidental or 

consequential damages.

This Applicator is subject to design changes and 

Fast Ag Solutions

 shall not be required to retrofit or exchange items on 

previously sold units except at its own option.

FAST Ag Solutions

Warranty void if not registered.

Содержание 8200











































Отзывы: