PREPARING THE LIQUID SYSTEM
PREPARING THE LIQUID SYSTEM3PT Applicator 813P / 833P
Page 47
PREPARING
THE
LIQUID
SYSTEM
CAUTION: Prevent serious injury or
death
Check the chemical or fertilizer M/SDS for
proper handling instructions.
Toxic chemicals can enter the body by
breathing spray or contact with bare skin.
Do not take a chance with your health and
safety.
IMPORTANT: Do not run the pump dry
- damage may occur.
Clean Strainer Filter
A.
Screen
The liquid system is equipped with a screen
(A) in its suction line to remove dirt and
impurities.
Clean the filter at the start of each day or
when dirt is detected in the system.
1.
Clear area of bystanders.
2.
Close the liquid supply valve.
3.
Remove the cap to access the
screen.
4.
Use clear water to clean the screen.
IMPORTANT: Do not over tighten the
canister and crack its head.
5.
Install the screen in the canister and
tighten by hand.
6.
Open the liquid supply valve.
