AXLES, TIRES, and TRACKS
AXLES, TIRES, and TRACKS
3PT Applicator 813P / 833P
Page 33
AXLES, TIRES, and TRACKS
Checking Tire Pressure
Check tire pressure and inflate as necessary.
CAUTION: Avoid loss of vehicle control during transport from failure of overloaded
tires which could cause serious injury or death to you or others.
Equal pressure in all tires is necessary for even penetration. A low tire will cause deeper
penetration on one side than the other. Increased penetration on one side will result in side-draft
of the machine. Inflate tires to shown specification.
Tire Size
Pressure
20.5 x 8-10
621 kPa (6.21 bar) (90 PSI)
6.7R15
303 kPa (3.03 bar) (44 PSI)
Checking Wheel Nuts
B.
Gauge Wheel Nut
Check tightness of all wheel nuts (B) during the first week of operation and periodically after that.
Tighten all wheel bolts to specification.
Item
Specification
(B) Gauge Wheel Nut
95 N-m (70 ft-lbs.)
