4
Part #???
Revised ??????
Part # FAST4-207
Revised 6/16/14
FAST
™
3400 Democrat Rd.
Memphis, TN 38118
Phone: 901.260.3278
Toll Free: 1.877.334.8355
www.fuelairspark.com
Pigtail installation:
1.
Remove the C (31 pin blue) and D (16 pin gray) connectors from the XFI.
2.
There are white locks in the connectors that need to be slid out about 1/16” to allow new wires
to be inserted. It is easiest to slide the locks out by pushing down through the top of the
connectors. Pictured below is the bottom side of a connector with the lock slid out and ready to
accept new wires.
3.
With the white locks slid out, insert the three wires with XFI terminals into the XFI connectors.
They should lock into place.
•
Black – D5
•
Green – C30
•
Gray – C31
4.
After the new wires are inserted, press the white locks on the connectors back into place so that
they are flush with the connector bodies.
