Fast Lift Parts Rol-Lift E Series, Руководство по обслуживанию

Страница: 8 / 17

www.FastListParts.com
8
888-999-7715
Steer Wheels and Axle
Inspection
Steer wheels should not have flat spots or large pieces of metal imbedded in them (i.e. tacks, nails or metal
shavings). Chips in the wheel, which keep it from rolling smoothly, indicate the need for replacement. Steer
wheels should turn freely. They should not rub the bottom of the traverse. If they do, check for the correct
installation of the snap ring under the traverse. Rol-Lifts older style steer wheel has an 8" diameter and their
newer style has a 7 1/2" diameter. If the wheel is worn more than 1/4" from the normal diameter, replacement
is necessary.
Removal
Steer wheels
Standard height - With the jack on its side, remove the roll pin and
the wheel will be free to slide off. (10 minutes)
Lowered height - Turn the jack onto its side, remove the snap ring
and the wheel will be free to slide off. (10 minutes)
Steer wheel axle
Standard height - Turn the jack onto its side and remove the steer
wheels. Remove the snap ring on the pin that fastens the axle to
the stem of the hydraulic unit. Punch the pin out of the stem and
the steer wheel axle will be free to remove. (15 minutes)
Lowered height - Turn the jack onto its side and remove the steer
wheels. Remove the snap ring on the pin that fastens the axle to
the stem of the hydraulic unit. Punch the pin out of the stem and
the steer wheel axle will be free to remove. (15 minutes)
Installation
Steer wheel axle
Standard height - With the jack on its side, line up the pivot hole on the steer wheel axle with the hole in the
stem of the hydraulic unit and insert the pin that attaches the axle to the hydraulic unit. Secure the pin in place
with its snap rings. Slide the steer wheels onto the axle and secure them in place with the roll pins. (15 minutes)
Lowered height - With the jack on its side, line up the pivot hole on the steer wheel axle with the hole in the stem
of the hydraulic unit and insert the pin that attaches the axle to the hydraulic unit. Secure the pin in place with
its snap rings. Slide the steer wheels onto the axle and secure them in place with the snap rings. (15 minutes)
Steer wheels
Standard height - Slide the steer wheels onto the axle and secure them in place with the roll pins.
(10 minutes)
Lowered height - Slide the steer wheels onto the axle and secure them in place with the snap rings.
(10 minutes)
Steer Wheel
Snap
Ring
Roll Pin
Pin
Snap Ring
Steer Wheel Axle
Traverse
Hydraulic
Unit