FAST ComTec MCA4A Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 107

FAST ComTec MCA4A Скачать руководство пользователя страница 3

Software Warranty

FAST ComTec warrants proper operation of this software only when used with software and hardware
supplied by FAST ComTec. FAST ComTec assumes no responsibility for modifications made to this software
by third parties, or for the use or reliability of this software if used with hardware or software not supplied by
FAST ComTec. FAST ComTec makes no other warranty, expressed or implied, as to the merchantability or
fitness for an intended purpose of this software.

Software License

You have purchased the license to use this software, not the software itself. Since title to this software
remains with FAST ComTec, you may not sell or transfer this software. This license allows you to use this
software on only one compatible computer at a time. You must get FAST ComTec's written permission for
any exception to this license.

Backup Copy

This software is protected by German Copyright Law and by International Copyright Treaties. You have FAST
ComTec's express permission to make one archival copy of this software for backup protection. You may not
otherwise copy this software or any part of it for any other purpose.

Copyright © 2015-2018 FAST ComTec GmbH

D 82041 Oberhaching, Germany

All rights reserved

This manual contains proprietary information; no part of it may be reproduced by any means without prior
written permission of FAST ComTec, Grünwalder Weg 28a, D 82041 Oberhaching, Germany. Tel: ++49 89
66518050, FAX: ++49 89 66518040.

The information in this manual describes the hardware and the software as accurately as possible, but is
subject to change without notice.

F

ComTec GmbH

3

«
1
2
3
4
5
...
»

Содержание MCA4A












































































































Отзывы:

Нет отзывов