11.
Spray WD-40 on the push
lock portion of the banjo fit-
ting and on the inside diame-
ter of the fuel line before in-
serting the push lock into the
fuel line. Assemble this banjo
fitting to the outlet port of the
DDRP using the banjo bolt
and 2 washers.
12.
Measure and cut the oppo-
site end of this fuel line to
the inlet port of the factory
fuel filter housing, top
(early model) or top side
(later model). Assemble
into this port using the as-
sembly instruction in the
previous step.
13
.
After everything is good and tight you can now plug the DDRP into
your factory wiring harness.
To insure our extended 4 year warranty be sure to send completed warranty informa-
tion in to Diesel Performance Products, Inc. 16240 Hwy o Suite B Marthasville, MO.
63357, with a copy of your receipt.
