Fasep 2000 srl
Rev. 1.3
Videotronic V653.G2: User’s Manual
02 april 2010
3-2
Fig. 49
4.2
How to control the calibration of wheel balancer and position weight
Switch on the wheel balancer.
Select
SET UP >
CALIBRATION >
SET/OK >
CHECK CALIBRATION
> SET/OK.
Put a wheel on the shaft and press
<START>
(Fig50).
Put the calibration weight (Fig.51) and press
<SET/OK>
.
Close the wheel guard or press
<START>
.
At the end of the spin,
160-0
will show on the
video (tolerance allowed is ±10).
Put the weight at 6h o’clock: the weight
indicators of internal side must be both green.
If not, press
<6h>.
Put the weight at 6h o’clock and press
<SET
OK>
.
Fig. 50
Fig. 51
Fig. 52
