Fasep 2000 srl
Rev. 1.3
Videotronic V653.G2: User’s Manual
02 april 2010
3-1
Fig. 45
Fig. 46
Fig. 47
Fig. 48
4
CALIBRATION OF WHEEL BALANCER
4.1
How to calibrate the wheel balancer
NOTE
:
the following symptoms indicate need for calibration::
a) check calibration program fails.
b) constant low or high weight readings.
c) indicated point of unbalance constantly
wrong
d) more than 2 spins required to balance wheels
repeatedly
.
Switch on the wheel balancer.
Select
SET UP >
CALIBRATION >
SET/OK >
CALIBRATION > SET/OK.
Spin with no wheel on shaft (Fig. 46)
Close the wheel guard or press
<START>
.
At the end of the spin, put a wheel (Fig. 47)
and close the wheel guard or press
<START>
.
At the end of the spin, put the calibration
weight (Fig. 48) and close the wheel guard or
press
<START>
.
