Fasep 2000 srl
Rev. 1.3
Balatron B110, B210: User
’s Manual
15 July 2013
5-1
5
MEASUREMENT AND CORRECTION OF UNBALANCE
5.1
Placing the wheel rim on the wheel balancer
5.1.1
Select the cone or flange suitable for the wheel to be balanced. Specific mounting instructions are delivered with each flange.
G
NOTE
The operation of centering and tightening of the wheel on the flanges is of basic importance for correct balancing.
Good results depend on proper performance of these procedures.
Clean accurately all cones, shaft and adapter surface before placing the wheel on the wheel balancer.
!
CAUTION
Always make sure flanges are correctly locked on the motor shaft and wheel is correctly locked on the
flange being used.
5.2
How to compensate unbalance of flanges using AFC function
G
NOTE
This operation allows to put compensate unbalance of flange and other accessories.
5.2.1
Lock the required flange on the shaft without the wheel.
HOW TO TURN ON AFC FUNCTION
HOW TO TURN OFF
AFC FUNCTION
The ZERO led blinking.
The ZERO led is on.
Remove the flange.
The ZERO led switch off.
