Faroudja Faroudja DVP1080MF, Инструкция по установке и эксплуатации

Страница: 16 / 22

1
rS232 coMManDS
The ‘dvp’ Header, followed by a comma (no
space), is used to delimit the Header from the
Command. The following is an example, using
Windows HyperTerminal, for Power On using a
standard Modem Cable:
»
dvp,on [Enter]
([Enter] denotes a carriage return – pressing
the Enter key on the keyboard)
•
The DVP1080MF goes through a 10 second
initializing process when the ON command
is sent. Do not send any commands for 10
seconds after sending the ON command.
You may also issue simultaneous commands
by adding a comma to delimit each Function
Command prior to issuing the Carriage Return
Command.
»
dvp,x,a2,srn4[Enter]
(Control Syntax = Header, YCrCb
(Component Input), Anamorphic, Scan Rate
1280x720[carriage return])
Personal Computer
(PC Control) Use the
standard Windows HyperTerminal program
to control the DVP-1080. You can use an
equivalent program on a Macintosh computer.
If an RS232 port is unavailable, many types
of USB/Serial converters will work. Select the
options listed below and utilize a standard
9-pin Modem Cable (not a null-modem
cable). Once connection has been established,
type
dvp,help
and then press
[Enter]
. The
OPERATION COMMANDS available will then
be echoed back to your personal computer.
BPS 19200
Data bits 8
Parity None
Stop bits 1
Flow control None
AMX and Crestron control examples; including
their respective Carriage Return commands:
AMX
“’dvp,on’,13”
“’dvp,off’,13”
Crestron dvp,on\r
dvp,off\r
RS232 CONNECTIONS
RS232 OPTION CONNECTOR
The RS232 Option connector (10 in the diagram
on page 8) is used in the latest firmware revi-
sions as a serial OUTPUT to control some display
functions. At present this control is limited to
handling power on/off and 50/60Hz switching
on Meridian Faroudja 1080p projectors. When
the DVP1080MF is powered up, it will command
the projector to switch on; and when powered
down, it will also power-down the projector.
Similarly, the DVP1080MF will switch the pro-
jector to 50/60 Hz operation depending on the
active input source. Contact Meridian Technical
Support for details on implementing this func-
tion, as additional features may become available
in due course.