1
STORING PRESETS USING THE OSD
1. Make all the desired image changes.
2. Using the DIRECTIONAL keys, go to the
INPUT menu.
3. Highlight the Profile number to store in.
4. Press the [STORE] button on the remote.
» Profiles can also be stored in the SETUP menu.
Profiles stored using the OSD will override
Profiles stored via the SETUP menu AND vice-
versa.
IMAGE ADJUSTMENTS:
Adjusting picture
levels can be done by pressing a direct access
button such as [CONT.] and then pressing a
three digit number on the NUMBER PAD or by
using the OSD and directional arrows to move
the adjustment sliders on the OSD.
• It is recommended that Brightness and Contrast
be adjusted in the display device first, if
possible, then adjust for individual movies or
channels using the DVP1080MF.
• A properly adjusted image is key to a good
picture. For each installation, the processor
should be calibrated for the sources using
reference test patterns whenever possible.
The following section will list a suggested test
pattern to use to get the best results.
BRIGHT. BUTTON
Adjusts the darkest areas of the screen.
» Adjust so the shadows are as dark as possible
but subtle details are still visible (such as seeing
the wrinkles in a dark suit on a person standing
in the shadows). Suggested test pattern: PLUGE
CONT. BUTTON
Adjusts the lightest areas of the image.
» Adjust so the lightest areas are as bright as
possible but detail is still visible (such as seeing
the details in clouds on a sunny sky. Suggested
test pattern: 10 step gray scale.
» The image is too bright if the lightest bars in the
test pattern disappear or if they start to change
colour.
COLOUR BUTTON
Adjust to reproduce accurate colours.
» Film-originated sources typically have more
subtle colour levels compared to video-
originated sources (sports, TV shows).
Suggested test pattern: SMPTE colour bars
(using blue filter).
TINT BUTTON
Adjust for accurate tint.
• Tint adjust is only available with Composite or
S-Video sources.
» If the image colour still seems off balance
with the Tint set correctly, the gray scale of
the display may need adjusting. Contact your
installer for assistance. Suggested test pattern:
SMPTE colour bars using a blue filter.
DETAIL BUTTON
Adjusts the amount of enhancement in the
image.
Proper enhancement levels should add
subtle improvements in detail. Too much
enhancement will produce fake looking edges
and ringing. The higher quality the source,
typically, the less enhancement required.
» If a digital source (eg a poorly transferred DVD
or a very compressed satellite channel) has
excessive compression artifacts, reducing the
detail level can help to make the artifact less
visible.
• Suggested test pattern: DVD movie with a close
up of a face in still frame. Adjust so the face has
detail but the edges do not look fake (such as
along the bridge of the nose).
ASPECT RATIO BUTTONS
Each selects the proper aspect ratio of the
source being viewed.
• The proper screen shape must be set in the
SETUP menu during initial installation in order
for these settings to function properly. See Page
10 for details.
ANAMORPHIC BUTTON
Selects proper aspect ratio for sources
formatted for wide screen displays (sometime
called “Enhanced for Widescreen” TVs).
• DVD players must be set for 16:9 displays for
proper screen shape. See the DVD player setup
menu to adjust.
LETTERBOX BUTTON
Selects proper aspect ratio for sources
formatted for the letterbox screen shape (non-
anamorphic letterbox).
» This mode can also be used with anamorphic
2.35:1 (Cinemascope) sources when combined
Содержание Faroudja DVP1080MF
Страница 2: ...This page intentionally left blank ...
Страница 21: ...21 This page intentionally left blank ...
