Faro FOCUS3D X 130, Руководство пользователя

Страница: 137 / 190

FARO
®
Laser Scanner Focus
3D
X 130 Manual
January 2014
6
which shall be the amount that FARO would otherwise charge for an evaluation
under a non-warranty service evaluation.
4.06The Warranties do not apply to:
a) Any defects in any component of a System where, if in the reasonable
opinion of FARO, the Focus
3D
X 130, Software or System has been
improperly stored, installed, operated, or maintained, or if Purchaser has
permitted unauthorized modifications, additions, adjustments and/or repair to
any hard drive structure or content, or any other part of the System, or which
might affect the System, or defects caused or repairs required as a result of
causes external to FARO workmanship or the materials used by FARO. As
used herein, “unauthorized” means that which has not been approved and
permitted by FARO.
b) The Warranties shall not cover replacement of expendable items, including,
but not limited to, fuses, diskettes, printer paper, printer ink, printing heads,
disk cleaning materials, or similar items.
c) The Warranties shall not cover minor preventive and corrective
maintenance, including, but not limited to, replacement of fuses, disk drive
head cleaning, fan filter cleaning and system clock battery replacement.
d) Any equipment or its components which was sold or transferred to any party
other than the original Purchaser without the expressed written consent of
FARO.
4.07Factory Repairs
a) IF SYSTEM IS UNDER MAINTANENCE/WARRANTY: The Purchaser
agrees to ship the Product to FARO in the original packing containers. FARO
will return the repaired or replacement Product. FARO will incur the expense
of the needed part and all return shipping charges to the Purchaser. FARO may
authorize the manufacturer of a component of the Product to perform the
service.
b) IF SYSTEM IS UNDER PREMIUM SERVICE PLAN: When practical and
subject to availability, FARO will make available to the Purchaser substitute
component parts or Focus
3D
X 130’s (“Temporary Replacements”) while
corresponding parts of the Purchaser’s system or Focus
3D
X 130 are
undergoing repair at FARO’s factory. Shipping charges for these “Temporary
Replacement” parts or Focus
3D
X 130’s will be the responsibility of FARO.
c) IF SYSTEM IS NOT UNDER MAINTANENCE/WARRANTY: The
Purchaser is responsible for the cost of the replacement part or software, and