manualshive.com logo in svg

FarmTek PolyMax, Руководство пользователя, Страница: 20 / 25

Поделиться
Скачать
FarmTek PolyMax Скачать руководство пользователя страница 20

20

Revision date: 05.01.19

ATTACH THE AIR PUMP AND AERATOR STONES

For optimal system performance and to extend the life of the nutrient 

solution through increased oxygenation, an aerator pump and aerator stones 

are recommended. These are placed at the bottom of the reservoir when 

installed. Contact your sales representative for additional information and to 

purchase these items.
1.  Choose a position for the air pump and use it to determine the length 

of each air tube. Cut two air tubes from the 110091 tubing (or other 

approved tubing). These must be long enough to run from the air pump 

position 

to the bottom of the reservoir

. 

 

ATTENTION:

 Position the air pump at a level that is 

above the 

reservoir at all times to prevent siphoning

 of the nutrient solution 

from the reservoir.

2.  Attach a tube to each stone.
3.  Connect the free end of each tube to the air pump and lower each stone 

into the reservoir.

4.  Place the air pump in the position chosen in Step 1.
5.  Connect the air pump to power and test the operation. Verify that air is 

filtering through each air stone. Monitor the air pump regularly to ensure 

proper operation of the aerator system. 

 

NOTE:

 When the system is fully operational, the air pump will run 

continuously. 

Do not connect it to any circuit controlled by a timer or 

shutoff switch.

6.  After testing air flow, turn off the aerator pump until the system is fully 

functional.

Assembly Instructions

Attach tubes to 

air pump.

Attach 110091 

tube to air stone.

2

3

ATTENTION:

 Always position the air pump 

above

 the reservoir/water 

level to prevent siphoning of the reservoir.

109260 Air 

Stone

17

Содержание PolyMax


























Отзывы:

Нет отзывов