13
Revision date: 05.01.19
Assembly Instructions
After the supply and return lines are assembled and secured, install
the fittings for the drip lines. There are different fittings available for
your system. In this example, the 111044 tee fittings are used for the
system. On the next page, the Woodpecker Drippers with a 2-way
manifold are shown.
Consult with your sales representative to
determine which is best for your application.
Determine the length of drip line tubing required for each bucket. Two
(2) lines are needed for each bucket.
Cut the tubing to length and attach each to the 111044 tee fitting as
shown. Repeat for all fittings needed for the system.
Using the 110743 hole punch tool, carefully punch a hole in the
supply line for each fitting. For a uniform appearance, align the fitting
with the drain fitting of each bucket when possible.
Finally, carefully grip the tee fitting with pliers and push the fitting into
one of the punched holes. Gently pull the fitting to seat it in the hole.
Repeat the process to install all remaining 111044 fittings.
3
2
5
1
4
6
7
8
Dashed line shows the supply lines to the buckets.
10