GREENHOUSE BENCH KITS
8
Revision date: 09.03.08
5
ATTENTION:
The 108292 Bench Top does not include legs as shown below. Legs, bracing, and fittings are
included with the 108292S Bench System only. Installation of the PolyMax® panels is the same for both.
Gather two (2) PolyMax® (#HA2215) panels and six (6) washers (#FAME50) for the bench top.
Set the PolyMax® panels in place as shown and square them on the frame. Using the mounting holes in
the panels, secure them to the frame using Tek screws. Do not overtighten. Screws should be snug.
There will be a space between the PolyMax® and the frame at the end where the interlocking lip is on top.
Align three washers between the frame and the mounting holes at the corners. Secure using Tek screws.
Tek screw
Align panels with frame. Verify that
the two panel lips are interlocked
before securing with Tek screws.
Set panels on the frame. Panel lips will
interlock in the middle.
NOTE:
White dashed line
shows the seam between the
two separate panels.
Tek screw goes
into the mounting
hole, through
three washers,
and is secured to
the frame.
Washers keep PolyMax®
bench top level.
Frame
Washers
Tek screw
PolyMax®