GREENHOUSE BENCH KITS
4
Revision date: 09.03.08
1
IMPORTANT:
The 96" tubes will
span the entire length of the bench.
Verify that the open corners of the
2-way corner fittings are positioned
to accommodate the whole tube. See
diagram to the right.
96" Tube
18.25" T
ube
ATTENTION:
Leave 1/4" space between the end of the 96"
tubes and the open corner edge.
1/4"
96" T
ube
96" T
ube
18.25" T
ube
Tek screws
18.25" T
ube
Outside-to-Outside Dimensions
WIDTH: 22-1/2"
LENGTH: 96-3/4"
96-3/4"
outside-to-outside
22-1/2"
outside-to-outside
Gather two (2) 96" tubes, two (2) 18.25" tubes, and four (4) 2-way corner fittings.
Assemble as shown below. Secure each 2-way corner fitting to the tubes using a Tek screw positioned on
the inside of the fitting. Do not position Tek screws on the top or bottom of the frame.
ATTENTION:
Set the outside-to-outside dimensions and then measure the assembled frame corner-to-
corner. The frame is square when the corner-to-corner measurements are the same.
