GROWSPAN
™
GOTHIC PREMIUM GREENHOUSES
22
106213_14_15_16
Revision date: 06.26.18
B
A
6' x 10' Panels
Not to scale.
Secure end panels to all vertical end frame tubes and to the
end rafter using FA4484B screws and 102921B washers.
END PANEL INSTALLATION (continued)
14. Continue installing polycarbonate panels and aluminum
profile in locations shown on end panel diagrams
(Quick Start section) for front and back end walls.
Diagram shows end panel locations.
17. Repeat procedures (as needed) to install remaining
end panels for other end of greenhouse.
NOTE:
Consult Quick Start section for additional
information.
18. Continue with
Main Cover Installation
procedures on
the next pages.
ATTENTION:
In above photo, top of panel is removed
using a power tool equipped with a round cutting bit.
Greenhouse in photo used for illustration only. It is of a
different model.
16. Standing outside the door, install Tek screws through
door frame and into end wall frame member to secure.
Tek screw
Consult End Panel Diagrams when installing panels.
Cut upper panel
to proper length.
15. Cut panel(s) to proper height after attaching to end wall
frame.
