5
Revision date: 03.08.17
Pictorial Parts Guide
PICTORIAL PARTS GUIDE
The following graphics and photos will help identify the different parts of vent system. Each component has a specific
position on the vent and building frame. To better understand how to assemble the vent system components, review
this guide before you begin. Consult bill of materials for specific component information.
IMPORTANT NOTE ABOUT SKU/PART NUMBERS:
The sku numbers shown on this page identify the basic profile
of the part. Since vent systems are available in many widths and lengths, additional numbers and letters may appear
in the sku number for each of these items. Consult the diagrams (if provided) for your vent system during assembly to
position the different profiles correctly. Additional notes are shown below.
ALWAYS INSTALL THE DIFFERENT VENT COMPONENTS IN THE POSITIONS SHOWN ON THE DIAGRAMS
FOR YOUR VENT SYSTEM AND BUILDING!
111983 Weather-Stripping
112166
#10-12 x 1/2" Hex Screw
104548
H-Channel
115069 Vent
Mounting Plate
*Actual motor may differ in size and design.
Vent Motor*
FAG334B Bolt
(5/16" x 2")
FALF37B
(5/16" Locknut)
FALF15B
(1/4" Locknut)
FA4476B / FA4482B / FA4484B Tek Screw
&
102921B Neo-Bonded Washer
FAG102B Bolt
(1/4" x 3/4")
ATTENTION:
Use these fasteners
to secure bottom rail splice
(111610SPL) to bottom rails.
