16
16
Revision date: 08.26.15
4. Take one chain and slide the end over a lower
1/4" bolt of one support assembly.
NOTE:
Carefully roll the bench top to the
opposite side to access the bracket.
1. Take the AR4112Z10 length of chain and
measure a 12" section.
5. Squeeze the link around the bolt, add a 1/4"
nut, and tighten to secure the chain.
NOTE:
Position so chain hangs down as
shown in the next photo.
2. Using pliers, grip the link and carefully bend
to open it enough to separate the 12" section
from the bulk chain.
6. Verify that the link at the free end is open
enough to hook onto the expanded metal top.
3. Repeat this process to create six (6) 12"
pieces of chain. (The 12' long frame has eight
(8) chains in all.)
7
INSTALL SAFETY CHAINS
Assembly Instructions
ATTENTION:
Actual bench may differ from what is shown.
Consult the Quick Start Guide for your bench details.
