manualshive.com logo in svg

FarmTek Brute 108265, Быстрый старт, Страница: 7 / 9

Поделиться
Скачать
FarmTek Brute 108265 Скачать руководство пользователя страница 7

7

BRUTE

™

 FEED  BUNKS               

Revision date: 09.03.08

5

 Gather six (6) one-way plates (#104624), two (2) 92" lengths of square tube, one (1) 96" length of square 

tube, four (4) 10" lengths of square tube and two (2) 4-way fittings (#104627). 

Complete the following steps inside the frame for easier assembly. 

Slide a 92" tube into a slot of a 4-way fitting. Slide the 96" tube into the opposite slot.  Slide two 10" 

tubes into the remaining slots of the 4-way fitting. Slide another 4-way fitting onto the open end of the 96" 

tube.  Slide the remaining 92" tube into the opposite slot of the 4-way fitting.  Slide two 10" tubes into the 

remaining slots of this 4-way fitting.  Slide a one-way plate onto the open end of each tube. Do not attach 

yet.

With the assembled pieces into the center of the frame as shown below,  verify that the plates at each end 

panel are over the end panels and secure to the bottom tube with Tek screws.  Secure the plates at the 

sides to the 3-way fittings with Tek screws.

When the center piece is secured at all six ends, secure each tube to the one-way plates and 4-way fittings 

using Tek screws positioned on each side of the plate or fitting slot.

92" T

ube

92" T

ube

96" T

ube

Tek screw

Tek screws

10" 

Tube

4-way 

Fitting

Tek 

screws

Plate to 

fitting 

connection

Tek screws

104624

Содержание Brute 108265










Отзывы:

Нет отзывов