manualshive.com logo in svg

FarmTek Brute 108265, Быстрый старт, Страница: 4 / 9

Поделиться
Скачать
FarmTek Brute 108265 Скачать руководство пользователя страница 4

BRUTE

™

 FEED BUNKS

4

Revision date: 09.03.08

1

Before assembling the feed bunk, layout and measure the 1.5" x1.5" square tube lengths to verify that you 

have all the correct tubes.

Gather six (6) 96" tubes and two (2) 24" tubes.  Assemble as shown below using corner brackets, 3-way 

fittings and Tek screws. 

IMPORTANT:  

The 96" tubes will span the entire length of the feed bunk.  When attaching the corner 

brackets to tube lengths, verify that the 96" tubes slide completely into the corner.

96" T

ube

96" T

ube

96" T

ube

24" T

ube

24" Tube

96" T

ube

96" T

ube

96" T

ube

Corner bracket 

fitting

96" tube slides 

all the way into 

the corner

24"

tube

3-way Fitting

Slide the 96" tubes in to 

meet in the center.

Measure and 

mark line here.

Tek screws

NOTE: 

To align the tubes in the center of the fitting, 

measure and mark a line 4-7/8" from each end.  

4-7/8"

4-7/8"

ATTENTION:

 Install Tek screws in 

these locations

Outside of 

corner bracket

Top of 3-way fitting

Содержание Brute 108265










Отзывы:

Нет отзывов