4
Revision date: 04.13.12
CARTS AND WAGONS
Parts List and Tools Required
2
NOTE
:
Hardware may ship attached to parts.
1. Attach steering link to the front axle support using
two (2) M8x18 hex bolts, M8 flat washers, and
M8 locknuts to secure the support as shown in
diagram A.
2. Slide yoke onto the stud welded to the underside
of the top cross bar of the axle support. Secure in
place using a large flat washer and the cotter pin
as shown to the right.
NOTE:
Insert shows cotter pin attached to the
underside of the axle support.
Using pliers, spread
the ends of the cotter pin to secure in place
.
3. Next, align back hole of the yoke with steering link
and secure into place using one (1) M8x18 hex
bolts, M8 flat washer, and M8 locknut as shown in
diagram B.
FRONT WHEEL ASSEMBLY
Steering Link (1)
M8 Locknuts (3)
M8 Washers (3)
Yoke
Steering Link
A
Front Axle Assembly
Socket/Wrench Set
Pliers
Yoke
Steering
Link
M8x18 Bolts (3)
Front Axle Support (1)
B
M8x18 Hex Bolt,
flat washer, and
locknut
Underside
View
Cotter Pin
& Washer
Step 2
Large Flat Washer (1)
Cotter Pin (1)
