3
Revision date: 04.13.12
CARTS AND WAGONS
Parts List and Tools Required
To better align the wagon, do not fully tighten
the nuts and bolts until the entire wagon is
assembled.
NOTE:
Hardware may ship attached to parts.
Photos used in these instructions are not to
scale.
1. Slide the rear axle braces onto the rear
axle assembly (A). Curved end of rear axle
braces should angle inward as shown.
2. Slide one (1) wheel, M12 flat washer, and
M12 locknut in that order onto each end
of the axle as shown in diagram B.
Do not
over tighten the nuts, wheels spin freely
.
1
REAR WHEEL ASSEMBLY
Flat washer and locknut are used
on the outside of the wheel.
Install
the wheel with the valve stem to the
outside.
Rear Axle Braces
Rear Axle Assembly
A
B
Wheels (2)
Rear Axle Support (1)
Rear Axle Braces (2)
Socket/Wrench Set
Pliers
M12 Flat Washers (2)
M12 Locknuts (2)
