FARMTECH T-DCBM-4, Руководство пользователя

Страница: 6 / 36

7
PREPARATION AND RUNNING OF THE MACHINE
Connecting the machine to the tractor:
Connect the Rotary Disc Mower to tractor by its three point hitch system.
At the same time put top and bottom safety pins according to convenient category.
(Note: Tractor max draw power till 40 HP are stated Category I, draw power which is
between 40-100 HP are stated Category II. )
For this reason top and bottom pins diameters will be selected according to category I and
category II and wear them.
Rotary Disc Mower machine is aranged acording to category II.
See Table-1
Insert the safety pin.
Arrange the top and bottom arms so that the machine is paralel to the land.
(Note: Meanwhile tractor must be in a smooth surface. )
category Max draw
power
(HP)
Bottom arm tractor connection pin:
hole diameterØ(mm)
(max.)-(min.)
Top arm draw connection pin:
hole diameter Ø(mm)
(max.)-(min.)
I ...40 22,10-21,84 19,56-19,3
II 40-100 28,45-28,19 25,91-25,7
III 80-225 36,85-36,32 32,26-32
IV 180-400 50,8-49,7 45,5-45,2
Table-1. (Sufficient tractor top and bottom arms connection pin and dimensions for attaching the
machine and tractor)
Working with Rotary Disc Mower machine:
Max. Input rotation speed of the Rotary Disc Mower is 540 RPM
Provide to reach selected tractor’s queue pin revolutions per minute convenient
revolutions per minute for the machine.
ATTENTION!
STOP THE ENGINE THEN ADJUST AND PREPARE THE MACHINE
FOR WORK