Farmi Forest JL 450, Руководство по эксплуатации, техническому обслуживанию и запасным частям

Страница: 24 / 40

JL 450
24
TROUBLE SHOOTING
CONDITION POSSIBLE CAUSE REMEDY
Hard to pull the cable out Drum brake is too tight. Loosen the drum brake. See
instructionsfrom item ”Adjusting
the drum brake”.
Cable gets tangled on the drum. Cable too loose on the drum.
The cable is pressed between
loose loops. Loosen the pin and pull the
cable from the reel with the
help of a tractor. Reel the cable
tightly back in with the help of
the load.
Cable develops kinks. Cable brake too loose Tighten the drum brake.Tighten
cable on the drum by pulling out
the cable and by winching with
a heavy load.
Roller chain comes off. Roller chain too loose, some
part is broken or the aligning is
incorrect. Check the aligment of the
chain. Check possible damages.
Adjust the roller chain, change
if necessary. See chapter
”Adjusting the roller chain”.
Rattling sound Roller chain too tight, some
part is broken or the aligning is
incorrect. Check the aligment of the
chain. Check possible damages.
Adjust the roller chain, change
if necessary. See chapter
”Adjusting the roller chain”.
,QVXI¿FLHQWSXOORQWKHFDEOH
Normal wear of the clutch.
Minimum thickness of the clutch
plates is 7 mm. See chapter ”Clutch
adjustment”
Oil or grease in the clutch Disassemble and clean the
parts.
Clutch too loosely adjusted Adjustment of the clutch. See
chapter ”Clutch adjustment”
Tractor slides backwards when
winching Parking brakes are not on.
Dozer blade does not anchor the
XQLW¿UPO\WRWKHJURXQG
Lock on the parking brakes.
Lower the winch all way to the
ground.