Farmi Forest Corporation CH180HF, Руководство по эксплуатации, техническому обслуживанию и запасным частям, Страница: 14 / 52

CH180HF
14
1
3
2
LIFTING
Lifting points for each
machine are marked with
hook symbols.
Fig. 3. CH180 lifting point.
ASSEMBLY INSTRUCTIONS
Attach the feeder to the chipper from the left
side with the hinge pin (1) and from the right
side with bolt (M20) (2). See Fig. 4.
Attach the feed chute to the body of the feeder
using two MB hinged screws (4) and clasp
nuts (5). Lock the feed funnel into the working
position (6), see Fig 4a.
Attach the operating rod to the valve switch.
Connect the hydraulic hoses. Connect the
pressure hose (the oil flow direction has been
marked on the hose with arrows) for example
to the tractor pressure connection.
The maximum working pressure is 175 bar.
1.
2.
3.
4.
Attach the return hose either to the free return
connection or directly to the tank. An oil filter is
recommended in the return line. See Fig 4b.
Attach the discharge pipe to the chipper with
two M10 bolts and one M16 bolt.
Mount the chipper on the tractor’s 3-point
hitch.
Install the PTO shaft.
Check that the length of the PTO shaft is
correct for different hitch positions.
5.
6.
7.
8.
9.
CH180HF 380 kg
!
CAUTION!
Fig. 4. Mounting the feeder