Manual
VERSO 6 PS | VERSO 7 PS | VERSO 8 PS | VERSO 9 PS
23
│
32
5.3
ADJUSTING THE TRACK CULTIVATOR
Correct position of the track cultivator affects the resulting quality of processing.
The tractor track cultivator position can be adjusted either by height or length, as needed.
When adjusting the track cultivator positions, always observe generally valid labour safety regulations.
The track cultivators are located on the beams of the pulling fork. The cultivator can be moved on the
beam so that it loosens the compacted tractor wheel tracks.
The depth of the cultivator is set by removing the pin and moving the cultivator in the holder. Before you
set the depth of the cultivators, place the machine in the position when the cultivators are not loaded.
Lengthwise setting of the cultivators is performed by releasing the nuts of the screws and moving the
cultivators along the beam into the position behind the tractor wheels so that they loosen the compacted
tractor tracks.
The edge cultivators are located on the adjustable beam that can be extended into the required position by
loosening the screws.
Depth setting pin
Depth setting pin
