Farmet Triolent TX 300 N, Руководство по эксплуатации

Страница: 11 / 22

Manual
TRIOLENT TX 300 N | TX 350 N
11
│
22

Connect the machine using the TPS suspension bar to the lower arms of the rear TPS of the tractor, secure
the TPS arms using pins against disconnecting.

The machine aggregated with the tractor changes the distribution of the weight to the individual axles of
the tractor. The weight of the front axle is reduced and therefore the controllability gets worse. It also
affects braking properties.
When connecting, no persons may stay in the space between the tractor and the
machine.
4. MACHINE TRANSPORT ON ROADS
Transport Position of
TRIOLENT TX 300 N, TX 350 N
o
Connect the machine by suspending on the tractor using the three-point suspension equipment
o
Insert the side angle discs on the main frame into the transport position (Fig.4).
o Turn over the rear twin roller and secure it with the (Fig.6)
–
only if the machine is equipped with
the rear twin roller.
o
The machine must be equipped with removable shields with marking of contours, functional
lighting, and the board of the rear marking for slow vehicles (according to ECE No. 69).
o
The lighting must be activated during travelling on roads.
o
The tractor must be equipped with a special light device of an orange colour, which must be
activated during travelling on roads.
o
The maximum transport speed during travelling on roads is 20 kph.
o
Secure the lower shoulders of the tractor TPS from side swing.
Ban of transport with decreased visibility!
Fig.3
–
Side angle discs in the working position Fig. 4
–
Side angle discs in the transport position
Fig.5
–
rear twin roller in the working position Fig.6
–
rear twin roller in the transport position
Securing stopper
of the side disc