background image

 

 

Manual

 

SOFTER 15 PS  |  20 PS 

21 

 23 

 

9.

 

ENVIRONMENTAL PROTECTION 

 

 

Regularly check the tightness of the hydraulic system. 

 

Preventively replace or repair hydraulic hoses, possibly further parts of the hydraulic system showing signs 
of damage, before oil leaks occur. 

 

Check the condition of hydraulic hoses and perform their timely replacement. The service life of hydraulic 
hoses includes the time, when they were stored. 

 

Handle oils and greases according to valid waste laws and regulations. 

 
 

10.

 

MACHINE DISPOSAL AFTER SERVICE LIFE EXPIRY 

 

 

The  operator  must  secure  during  machine  disposal  that  steel  parts  and  parts,  in  which  hydraulic  oil  or 
lubricating grease moves are differentiated.  

 

Steel parts must be cut by the operator while observing safety regulations and handed over to the secondary 
raw material collection point. He must proceed with other parts according to valid laws about waste. 

 
 

11.

 

SERVICING AND WARANTY CONDITIONS  

 

 

11.1

 

SERVICING 

Servicing  is  secured  by  the  dealer  after  consulting  with  the  manufacturer,  possibly  directly  by  the 
manufacturer. Spare parts then using the sales network by individual sellers in the entire country. Use 
only the spare parts according to the spare parts catalogue officially issued by the manufacturer. 
 

11.2

 

WARRANTY 

11.2.1

 

The  manufacturer  provides  a  warranty  of  24  months  for  these  machine  parts:  main  frame,  axle,  and 

machine tow bar. For other parts of the machine, the manufacturer provides a warranty of  12 months. 
The warranty is provided from the date of sale of the new machine to the end user (consumer). 

11.2.2

 

The  warranty  applies  to  hidden  defects  that  will  show  in  the  warranty  period  with  proper  use  of  the 

machine and while fulfilling the conditions stated in the operating manual. 

11.2.3

 

The  warranty  does  not  apply  to  wearable  spare  parts,  i.e.  regular  mechanical  wear  and  tear  of 

replaceable parts of the working sections (shares, edges, etc.). 

11.2.4

 

The warranty does not apply to indirect consequences of possible damage, such as service life decrease 

etc. 

11.2.5

 

The warranty is bound to the machine and is not void upon an owner change. 

11.2.6

 

The warranty is limited to the disassembly and assembly, possibly replacement or repair of the defective 

part. The decision, whether to replace or repair the defective part, is up to the contractual workshop of 
Farmet. 

11.2.7

 

During the warranty period, only the authorised servicing technician of the manufacturer may perform 

repairs  or  other  interventions  into  the  machine.  In  the  opposite  case,  the  warranty  will  not  be 
acknowledged.  This  provision  does  not  apply  to  the  replacement  of  wearable  spare  parts  (see  point 
11.2.3). 

11.2.8

 

The warranty is conditioned by using the genuine spare parts of the manufacturer.

  

 

 
 
 
 
 
 
 
 
 
 

 
 

Prepared by: Technical Department, Farmet a.s., Jirinkova 276, Ceska Skalice 552 03, 

On 20 May 2015, changes reserved 

  

Содержание SOFTER 15 PS
























Отзывы: