Farmet FANTOM FX 850 PS Скачать руководство пользователя страница 27

Страница: 27 / 33

Manual

FANTOM 850 PS

│



On all piston rods, the same washer combination must always be set according to the tables at
the setting point!!!



Specified working depths at individual positions are only for information. They may vary according to
particular soil conditions. Required number of distance washers may be added/removed as needed.

5.1.1.

AJUSTMENT OF DEPTH ON ROLLERS



When working, the number of washers must be the same on all
rollers.



The setting must also match the setting on the tow bar.



During road transport (height below 4 metres), all washers must be
used.



There are no transport washers on side frame piston rods.



Depth setting is also similar on the tow bar piston rod.



On the tow bar piston rod, every fifth washer is thicker for easier
distinction.

5.1.2.

HITCH HEIGHT RELATED SETTINGS



The number of washers on the tow bar piston rod must be adjusted
according to the height (h) of the tractor hitch above the ground.



The number of washers must be increased by the number stated in the
following table.



The number of washers can be adjusted for achieving frame
parallelism with the ground.

5.1.3.

DEPTH ADJUSTMENT ON THE COPYING

WHEELS



Perform the setting with the machine lifted up.



Select the pin position corresponding to the desired working depth.



The position must match the setting in the rest of the machine.



The setting may vary according to specific soil conditions.

Содержание FANTOM FX 850 PS


































Результаты поиска

Содержание FANTOM FX 850 PS

Отзывы:

Похожие инструкции для FANTOM FX 850 PS

Бренды по названию

Популярные бренды

Farmet FANTOM FX 850 PS, Руководство по эксплуатации

Результаты поиска

Содержание FANTOM FX 850 PS

Отзывы:

Похожие инструкции для FANTOM FX 850 PS

Бренды по названию

Популярные бренды