Farmet FANTOM 650 PRO, Руководство по эксплуатации

Страница: 33 / 61

COMMISSIONING
8.3.2 Machine folding procedure
Machine Folding Procedure – Transport Position
Initial position: The machine is unfolded and recessed, both ball valves outside are opened.
Conditions that must be observed prior to the commencement of folding:
• the rear section of rollers must be lifted in the maximum position
• the machine must be lifted up to zero position
1
Lift the machine on the axle, i.e. draw out the piston-rods of the axle using the yellow circuits into the
marginal position, i.e. maximum release.
Close the ball valve of the yellow circuit.
2
Fold the machine using the red circuit.
Close the ball valve of the red circuit.
The machine is ready for transport.
33 | 61