FARM-MAXX FTH Series, Руководство оператора

Страница: 17 / 39

FTH-Series Rotary Tillers
13
If this does not occur, proceed as follows for each of the two clevises:
 loosen the U-bolt clamping the clevis to the square tube;
 slide the clevis on the square tube, positioning it at distance of 16 1/4'' from the center of tiller
PTO. At the end of the operation the clevises shall be positioned symmetrically with respect to
tiller PTO, at distance of 32 1/2'';
 re-tighten the U-bolt, referring to the tightening table of this manual.
4.2. CONNECTING TO THE TRACTOR
To connect the tiller to the tractor the operator must do the following:
 drive the tractor in reverse, up to align the rear lifting arms to lower hitches of the tiller in parking
(see picture below);