Fargo HDP5000, Руководство пользователя

Страница: 27 / 39

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.5)
19
Printer Components: LCD and Softkey Control Pad
The Printer provides a two line, thirty-two (32) characters LCD Display that can
communicate helpful information about the Printer's operation. The bottom line of the
LCD Display will always be used to communicate the current function of the Printer's
softkey buttons.
This section describes how the LCD Display and Softkey Control Pad work together.
Component Description
Softkey
Buttons The Printer has two softkey buttons that appear below the LCD
Display. Their current function is indicated by the words appearing
above them. This function will change according to the Printer's
current mode of operation.
•
Press the corresponding softkey button under the choice you want
to select. If no word appears above a particular button, this
indicates it has no function in that particular mode of operation.
LCD Display The Printer's LCD Display will change according to the Printer's
current mode of operation.
Ready /
Printer Open
Screens Once the Printer has finished its system check and with the Printer
closed, the Printer will display Printer Ready to indicate that the Printer
is ready for operation. (
Note: The Printer will stay in this mode until it
receives a print job or it is turned OFF.)
•
If the Printer is opened, the Cover is Open screen will appear.
Press either the
Forward or Back buttons to move the Printer's
card path Rollers in the indicated direction. ( Note: This is helpful
when cleaning the Printer or if clearing jammed media.)
•
All rollers will move even if the Lam cover is not opened.
Component Description
Print Status
Screen During operation, the LCD will indicate the current Print Status by
showing you the area of the Printer that is active. It does this by
displaying the following messages:
•
FEEDING: Indicates that cards are being fed into the Printer.
•
FLIPPING: Indicates that the card is being transported to the
Flipper Module.
•
ENCODING: Indicates the encode station is encoding a card
(appears only if you are using a Printer with an optional built-in
Encoding Module).
•
PRINTING: Indicates the Printer is printing onto the HDP film.
•
RECIEVING DATA: Indicates that the Printer is receiving data
from the PC.